Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
1.9L Diesel Engine
-
Disconnect the connection hose to the intake connection..
-
Remove the intake flap motor.
2.0L Diesel Engine
-
Remove connecting pipe between intake hose and turbocharger.
-
Remove upper part of the toothed belt cover.
Continuation for All
-
Disengage the connector from the control module in - direction of arrow 1 - and disconnect in - direction of arrow 2 -.
-
Install the (VAG 1869/2).
-
Attach the bleeder hose from the bleeder bottles to the left front and left rear brake caliper bleeder valves and open the bleeder valves.
-
Operate the brake pedal using the (VAG 1869/2) at least 60 mm.
-
Close the left front and left rear bleeder valves.
Do not remove the (VAG 1869/2).
-
Place sufficient lint free cloths under the control module and hydraulic unit.
Make sure that brake fluid does not come in contact with the terminals.
-
First mark both brake lines for the master cylinder - A - and - B - and remove them from the hydraulic unit.