Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
/Page-279002.png)
-
Using a multimeter, check the Camshaft Adjustment Valve 1 (N205) for resistance.
Specified value: 5.0 to 9.0 ohms (at approx. 20° C)
If the specified value was Not obtained:
-
Replace the Camshaft Adjustment Valve 1 (N205).
If the specified value was obtained:
Checking voltage
-
Switch the ignition on.
-
Using a multimeter, Check the Camshaft Adjustment Valve 1 (N205) electrical harness connector terminal 1 to engine ground for voltage.
-
Switch the ignition off.
Specified value: battery voltage.
If the specified value was Not obtained:
-
Check the wiring connection for an open circuit, high resistance or short circuit to Ground (GND).
-
Check the wiring connection for damage, corrosion, loose or broken terminals.
-
If necessary, repair the faulty wiring connection.
If the specified value was obtained:
