Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
‹› While removing, the complete Rain/Light Recognition Sensor (G397) and not only the upper shell of the sensor must be pried off.
Installing
Install in reverse order of removal, noting the following:
-
Thoroughly clean windshield inside retaining plate with isopropyl alcohol.
-
If necessary, remove protective cap of new Rain/Light Recognition Sensor (G397).
‹› Surface (connecting pads) of Rain/Light Recognition Sensor (G397) must not be soiled when installing.
‹› If the surface (connecting pads) of Rain/Light Recognition Sensor (G397) is soiled, it can be potentially cleaned by "applying" and then "pulling
off" one or more adhesive strips.
-
Insert Rain/Light Recognition Sensor (G397) - 1 - into retaining plate on windshield - 2 - and press it firmly.