Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Washer Fluid Level Switch: Service and Repair
Windshield Washer Fluid Level Sensor
CAUTION!
‹› Turn off the ignition and all electrical consumers.
‹› Remove ignition key.
Removing
-
Remove front bumper cover.
-
Disconnect harness connector - 1 - from Windshield Washer Fluid Level Sensor (G33).
-
Pull Windshield Washer Fluid Level Sensor (G33) - 2 - out of its rubber seal.
-
Collect the draining fluid in a suitable container.
Installing
Install in reverse order of removal, noting the following:
-
Bleed headlamp washer system after completing assembly work. Refer to --> [ Headlamp Washer System, Bleeding ] See: Wiper and Washer
Systems/Service and Repair/Procedures.