Jetta SportWagen L5-2.5L (CBUA) (2009)
Alarm Horn: Service and Repair
Alarm Horn
The Alarm Horn (H12) is located at the right on the A-pillar in the fender.
Special tools, testers and auxiliary items required
‹› Drill (VAS 5134)
‹› Drill bit dia. 6 mm
‹› Pop rivet pliers (VAS 5072)
‹› To remove the Alarm Horn (H12), the anti-theft alarm system must be deactivated. Refer to => [ Anti-Theft Alarm System,
Activating/Deactivating ] See: Testing and Inspection.
CAUTION!
‹› Turn off the ignition and all electrical consumers.
‹› Remove ignition key.
Removing
-
Remove the right front wheel housing liner.
-
Using (VAS 5134) and a spiral bore dia. 6 mm, drill out both pop rivets - arrows -.
-
Remove Alarm Horn - 1 - in - direction of arrow - from body cutout.