Jetta SportWagen L5-2.5L (CBUA) (2009)
Steering Mounted Controls Communication Module: Service and Repair
Multifunction Steering Wheel Control Module
Removing
CAUTION!
‹› Special safety precautions apply to vehicles equipped with airbags General Information.
‹› Electrostatically discharge yourself before working on the airbag unit. This can be accomplished by touching an grounded metal
object such as a water pipe, heater pipe or metal support.
CAUTION!
‹› Switch off all electrical consumers.
‹› Switch ignition off and remove ignition key.
‹› Disconnect negative (-) battery terminal.
-
Remove driver's airbag, Removal and Installation.
-
Disconnect both electrical connections at control module.
-
Using a suitable screwdriver, carefully pry out the control module - arrow -.
Installing
Install in reverse order of removal.
-
Code control module for steering column electronics, --> [ Multifunction Steering Wheel, Adapting ]See: Steering and
Suspension/Steering/Steering Wheel/Testing and Inspection.