Jetta SportWagen L5-2.5L (CBUA) (2009)
C-Pillar Trim, Wagon
‹› Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Fold the bench seat and backrest forward.
-
Remove side upholstery:
‹› with rear side airbags --> [ Side Upholstery with Side Airbag ] See: Seats/Service and Repair/Rear Seats.
‹› without rear side airbags --> [ Side Upholstery without Side Airbag ] See: Seats/Service and Repair/Rear Seats.
-
Remove wheelhousing trim. Refer to --> [ Wheel Housing Trim, Wagon ] See: Scuff Plate/Service and Repair.
-
Remove the lock carrier cover. Refer to --> [ Rear Lock Carrier Cover, Wagon ] See: Luggage Compartment Trim.
-
Remove luggage compartment side trim --> [ Luggage Compartment Side Trim, Wagon ] See: Luggage Compartment Trim.
-
Remove emblem for airbag - 1 - and remove bolt - 4 - (4 Nm).
-
Remove the trim - 3 - with the clip - 2 - inward - direction of arrow A - from the C-pillar mount and both clips - 5 -.
-
Remove the trim downward - direction of arrow B -.
Installing