Jetta Wagon L4-1.8L Turbo (AWP) (2005)
^
Using 3409 wedge, insert the inner sealing lip into the groove in the cylinder.
Note:
^
Hold piston in front of caliper housing.
^
Screw piston into housing by turning knurled wheel clockwise.
Note:
^
Use special tool 3272/1 to help screw in.
^
If piston is pushed back with a piston resetting tool or by operating the foot brake the automatic adjustment in the brake caliper is
destroyed.
^
Install brake pads.
Pre-bleeding brake caliper
^
Open bleed valve -arrow A- and using a standard bleeder bottle, with brake fluid until bubble-free brake fluid flows from the threaded hole
-arrow B- (brake hose connection).
^
Close bleed valve.
Note: Position brake caliper as illustrated to pre-bleed.