Jetta Wagon L4-1.8L Turbo (AWP) (2005)
/Page-2171005.png)
^
Remove piston out of brake caliper housing by turning the knurled wheel counter - clockwise.
Notes:
^
Use special tool 3272/1 to help screw in.
^
If piston is difficult to move, use a 13 mm AF open end wrench on the flats ( arrow - A- ) provided for this purpose.
^
Remove seal using wedge 3409.
Installing:
^
The surface of the piston and seal must only be cleaned with methylated spirits and then dried.
^
Apply a thin coat of paste G 052 150 A2 to piston and seal before inserting.
^
Place protective seal with the outer sealing lip on the piston.
