Jetta Wagon L4-1.8L Turbo (AWP) (2005)
/Page-2717002.png)
-
Always replace
-
16.7 mm; 1.8 mm
10. Expansion valve
-
Located in right side of engine compartment
-
Hole for refrigerant lines at bulkhead must be must be sealed against splash water
11. O-ring
-
Always replace
-
14 mm; 1.8 mm
Removing
-
Discharge refrigerant system
-
Remove insulator -3-.
-
Remove retaining screw -6-.
-
Pull out refrigerant lines -7- and -8- and move aside.
-
Remove bolts -4-.
-
Remove expansion valve -10-.
NOTE: When replacing expansion valve, always replace O rings -5- & -9-, -2- & -11-.
