Jetta Wagon L4-1.9L DSL Turbo (ALH) (2003)
-
If a leak exists at the parking brake cable lever replace brake caliper housing
-
After repairing, pre-bleed caliper housing
Rear brake caliper piston, removing and installing
Special tools and equipment
-
3272 Piston resetting and removal tool
-
3409 Wedge
-
Bleeder container
Removing
-
Remove piston out of brake caliper housing by turning the knurled wheel counter-clockwise.
Note:
^
Use special tool 3272/1 to help screwing in.
^
If piston is difficult to move, use a 13 mm (0.512 inch) AF open end wrench on the flats (arrow -A-) provided for this purpose.