volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Manufacturer's Scan Tool|Page 4123 > < With Manufacturer's Scan Tool|Page 4121
Page 3
background image

-

Check wiring between test box and connector for open circuit according to wiring diagram.
Terminal 7 + socket 111
Terminal 4 + socket 103
Wire resistance: max. 1.5 Ohm

-

Check wires for short to one another, to vehicle Ground and to battery positive (B+).
Specification: Infinite Ohm

If no fault is detected in the wiring:

-

Replace Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) -J248-.

With Manufacturer's Scan Tool|Page 4123 > < With Manufacturer's Scan Tool|Page 4121