volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Roof rear locking device for manually operated convertible roof - Assembly overview > < Removing and installing roof front latch
Roof rear locking device for electrohydraulic convertible roof - Assembly overview
Roof rear locking device for electrohydraulic convertible roof - Assembly overview
  Note
Manually operated convertible roof → Chapter
   
1 - Roof latch
q   Removing:
–  Remove side trim panel → General body repairs, interior; Rep. Gr.70
–  Open convertible roof.
–  Separate connector → Item.
–  Remove bolts → Item.
q   Installing:
–  Fit bolts → Item and tighten lightly.
–  Separate connector → Item.
–  Align module for convertible roof catch.
–  Close roof.
–  Tighten bolts → Item when convertible roof locks
–  Then perform functional check.
2 - Washer
q   Qty. 7
3 - Bolt/screw
q   10 Nm
q   Qty. 7
4 - Cord for emergency release
5 - Servo motor
6 - Connector
7 - Microswitch (convertible roof closed)
8 - Microswitch (convertible roof open)

   

Roof rear locking device for manually operated convertible roof - Assembly overview > < Removing and installing roof front latch