volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing carrier unit > < Checking parallel running

New Beetle

Adjusting parallel running
Adjusting parallel running
  Note
The parallel running adjustment can only be undertaken when the drive and glass panel are removed while in "0" position.
–  Remove sunroof drive → Chapter.
   
The mark -arrow- on the rear of the guide upper section -1- must, on both sides, lie within the marks dimension -a- on the guide plate -2-.
The guide plate -2- must be located in the guide rails (cannot be moved by hand).
–  Slide guide upper part -1- from front to rear only centrally between the marks.
–  Install drive in this position ("0" position).
Then check "0" position.
  N60-0109

Removing and installing carrier unit > < Checking parallel running