volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Assembly overview - side trim > < Assembly overview - C-pillar trim
Removing and installing C-pillar trim
   
Removing and installing C-pillar trim
Removing
–  Remove anchorage points for rear seat belt relays → Front passenger airbag, seat belts; Rep. gr.69 and → Front passenger airbag, seat belts; Rep. gr.69.
–  Pull end strip (clipped) downwards off roof frame.
–  Remove bolt -2-.
–  Starting at top, pull trim -1- off C-pillar and unhook from luggage compartment trim -3-.
Installing
Installation is carried out in the reverse order.
  Note
Check clips -4- before installing trim and renew if necessary.

   

Assembly overview - side trim > < Assembly overview - C-pillar trim