New Beetle
| Removing and installing side trim |
| Removing |
| – | Remove bench seat and backrest → Seat frame; Rep. gr.72. |
| – | Pull trim -1- off in vicinity of clips -8- and -5- and lift out of clips -3-. |
| Installing |
| Installation is carried out in the reverse order. |
Note| t | Before installing trim -1-, check clips -5- and -8- and renew as necessary. |
| t | Pull clips -3- off trim and install on window flange as necessary. |
| t | Ensure interior door seal is seated correctly after installing trim. |
