New Beetle L4-1.8L Turbo (AWP) (2003)
-
Turn ignition switch to "ON" position
-
Push and release PRESS button -arrow 7- and pull locking handle down
NOTE: DO NOT pull on PRESS button
-
Turn handle -arrow 4- counterclockwise until it stops, then push convertible top upward, open it slightly and release the handle
-
Lift control switch and partially open the top
-
Raise door window and rear window to top position
-
Height -a- of both windows should be same; otherwise perform Z - axis adjustment
-
Distance -b- (measured horizontally near top of windows) must be equal to 9.5 mm±0.5 (0.35 in. - 0.39 in.) otherwise repeat Z - axis adjustment
NOTE: Illustration is showing the left door window and rear glass
-
Reinstall rubber plugs at bottom of door
-
Repeat procedure on opposite door
-
Tighten the ground (GND) cable to battery to 5 Nm. (44 in. lbs.)
-
Perform power restoration procedure
-
Proceed to Section B
Section B
Section B - Convertible Top Button Replacement