New Beetle L4-1.8L Turbo (AWP) (2003)
Fig. 1 Checking installation position of double clamp
-
Position double clamp with approximately 5 mm clearance to the appropriate marking.
^
Marking A (-arrow 1-) for vehicles with automatic transmission
^
Marking S (-arrow 2-) for vehicles with manual transmission
Fig. 2 Installation position of mount
-
Angled side on foot of mount (-arrow-) points forward.
Fig. 3 Separating point on exhaust pipe
-
Separate exhaust pipe at right angles at separating point -arrow 2-.
-
When installing fit repair type double clamp -4- at side markings -arrows 1 and 3-.
Tightening torque: 40 Nm
Fig. 4 Aligning central muffler stress free
The support pin on exhaust pipe must align parallel with tunnel bridge (dimension -x- on left and right the same).