New Beetle L4-1.8L Turbo (AWP) (2003)
3
-
Side window air outlet
-
Removing. Refer to "Air Outlets, Removing" See: Air Register/Service and Repair
4
-
Side air outlets
-
Removing. Refer to "Air Outlets, Removing" See: Air Register/Service and Repair
5
-
Center air outlet console
-
Removing. Refer to "Air Outlets, Removing" See: Air Register/Service and Repair
6
-
Instrument panel cross member
-
Loosening and tightening. Refer Fig. 5 in "Heating and Ventilation System, Assembly" See: Service and Repair
7
-
Servo motor for fresh/recirculating air door -V154-
-
Removing and installing
8
-
Fresh air blower -V2-
-
Removing. Refer Fig. 4 in "Heating and Ventilation System, Assembly" See: Service and Repair
9
-
Fresh air blower series resistance with fuse -N24-
-
Removing. Refer Fig. 4 in "Heating and Ventilation System, Assembly" See: Service and Repair
10
-
Intermediate duct
11
-
Cables
-
Installing and adjusting. Refer to "Heating and A/C Cables, Installing and Adjusting" See: Air Door/Air Door Cable/Adjustments
12
-
Rear footwell duct
13
-
Gasket
14
-
Connecting duct
-
With front footwell air outlet
-
Removing
15
-
Heater/evaporator unit*
-
Disassembly and assembly
16
-
Heater core*
-
Removing. See: Evaporator Case/Service and Repair
-
Always use new coolant after replacement
17
-
Heater core/bulkhead seal
-
Note installation position. Refer Fig. 2 in "Heating and Ventilation Unit, Assembly" See: Service and Repair
18
-
Defroster duct
-
Replacing:
-
Remove instrument panel
-
Loosen instrument panel cross member. Refer Fig. 5 in "Heating and Ventilation System, Assembly" See: Service and Repair
19
-
Instrument panel
-
Removing and installing
20
-
Center air outlet duct
21
-
Defroster air outlet panel
-
Removing