volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Manufacturer's Scan Tool|Page 1439 > < With Manufacturer's Scan Tool
Page 2
background image

-

Remove fuse 28 (fuel pump) from fuse holder.

WARNING!
Fuel system is under pressure! Before opening the system place a cloth around the connection. Then release pressure by carefully loosening the
connection.

-

Pull off supply line/hose -1- and collect leaking fuel with a cloth.

-

Connect VAG 1318 pressure gauge to fuel supply line/hose and to hose to fuel rail using adapters 1318/9 and 1318/17.

-

Open measured device cut-off tap. (Handle points in through-flow direction -arrow-).

-

Refit fuse 28 (fuel pump) in fuse holder.

-

Start engine and run at idle speed.

-

Measure fuel pressure.

Specification: Approx. 2.5 bar

If the specification is obtained:

With Manufacturer's Scan Tool|Page 1439 > < With Manufacturer's Scan Tool