volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Fuel Pressure Release > < With Manufacturer's Scan Tool|Page 3597
Page 3
background image

-

Wait until pressure has risen, and then switch off ignition. Simultaneously close shut-off valve of pressure gauge (lever perpendicular to direction
of flow -arrow-).

-

Observe pressure drop on pressure gauge.

If pressure does not drop:

-

Test check-valve of Fuel Pump (FP), Fuel Pump (FP), checking.

If pressure does drop again:

-

Open shut-off valve of pressure gauge (VAG1318) (lever in direction of flow).

-

Start engine and let run at idle.

-

Wait until pressure has risen, and then switch off ignition. Simultaneously pinch return hose tightly together.

If pressure does not drop:

-

Replace fuel pressure regulator, item 12

If pressure does drop again:

-

Check whether line connections, O-rings in fuel rail, and fuel injectors are properly sealed.

-

Check whether pressure gauge is properly sealed.

NOTE:  Before removing pressure gauge, remove fuse 28 again and put cleaning rags back around line connection which is to be disconnected.

Fuel Pressure Release > < With Manufacturer's Scan Tool|Page 3597