New Beetle L4-1.8L Turbo (AWP) (2003)
1
-
Backrest frame
2
-
Drivers and passengers side airbags
3
-
Bolt
-
10 Nm
4
-
Wiring harness
Drivers Side/Passengers Side Side Airbag, Removing and Installing
Drivers Side/Passengers Side Side Airbag, Removing And Installing --> 05.03
NOTE: Removal and installation is described for left side of vehicle. The same instructions apply for removal and installation for the right-hand side.
Removing
CAUTION:
-
Observe safety precautions for working on airbags
-
Never let anyone sit in the passenger compartment when the airbag system is being worked on, especially when the airbag system is being
connected to a power source or the battery is being reconnected.
-
Switch ignition off.
-
Open doors.
-
Disconnect battery ground (GND) strap
-
Remove driver/passenger seat (use Airbag adapter VAS 5094 ).
-
Remove backrest frame.
-
Remove backrest cover 05.03 -->.
-
Remove backrest cushion.