New Beetle L4-1.8L Turbo (AWP) (2003)
Use new bolts!
1. Box wrench insert (commercial type, 18 mm)
2. Open end wrench insert (commercial type, 18 mm)
Note:
Check to make sure that the boot is not damaged or twisted.
Fastener/location .................................................................................................................................................................................. Tightening torque
Ball joint to control arm ............................................................................................................................. 20 Nm (15 ft. lbs.) plus additional 90° turn
Use new bolts!
Ball joint to wheel bearing housing ..................................................................................................................................................... 45 Nm (33 ft. lbs.)
12-point nut for drive axle to wheel hub .................................................................................................... 50 Nm (37 ft. lbs.) plus additional 45° turn
Use new nuts!