New Beetle L4-1.8L Turbo (AWP) (2003)
Fig. 1 Circlip -arrow-, removing and installing
^
Press down carefully on piston cap until circlip an be installed.
Fig. 2 Piston rings, checking seating
^
One piston ring is installed on the pump shaft inside the clutch housing.
^
Ends of piston ring must be hooked together.
Fig. 3 Piston ring, installing/hooking ends together
^
Place piston ring in groove.
^
To hook ends together press sides of ring in and guide ends over one another.
^
Do not twist piston ring out of groove on one side.
Fig. 4 O-ring, installing
^
Insert O-ring in recess in turbine shaft -arrow-.