New Beetle L4-1.8L Turbo (AWP) (2003)
/Page-995002.png)
-
Check dimension -a- at three points and calculate average.
Specification: 19.5 to 21.1 mm
Note: Measured through hole in drive plate to milled surface of cylinder block.
If the specification is not attained:
-
Remove drive plate again and fit shim -2-. Tighten bolts again to 30 Nm.
-
Tighten bolts to 60 Nm and turn 90° (1/4 turn) further (turning further can be done in several stages).
