volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Campaign - Convertible Top Button/Window Clamp Bolts|Page 12239 > < Campaign - Convertible Top Button/Window Clamp Bolts|Page 12237
Page 38
background image

^

The comfort system is inoperative.

^

Pinch protection activates randomly.

^

Erratic window operation.

Technical Background

Symptoms may occur if vehicle has previously been upgraded with new design window regulators and control modules (see Technical Bulletin Instance
number 2011804), and after that repair, old (original system) index parts have been used in a later repair.

The two software levels of control modules (original vs. updated) are incompatible.

Pulley speeds on the window regulators (original vs. updated) are different.

If ANY ONE of these components are mismatched (original vs. updated), the system will not operate properly or become inoperative.

Production Solution

Symptoms only occur with vehicles manufactured before VIN 1Y_4M345795 which may have been updated.

Vehicles manufactured after VIN 1Y_4M345795 were produced with the updated system.

Service

To determine if a repaired regulator and / or window motor is the cause:

1.

Remove door panel(s) of previously repaired door(s), see Repair Manual Group 64 in Elsaweb.

2.

Disconnect the window motor connector.

3.

Using the remote unlock feature, unlock vehicle.

If the vehicle has been upgraded, the opposite window will drop.

Tip:

The 5051/5052 can be used to determine what window motor part numbers are installed on the vehicle.

If the opposite window drops, locate the part number of either window regulator or window motor that is NOT part of the column "Updated Design Part
number" listed below. --> Required Parts and Tools

Tip:

In most cases the last part(s) installed (after the update) will be the cause. 

If the opposite window does not drop, locate part number of either window regulator or window motor that is NOT part of the column "Original System
Part Number" listed below. --> Required Parts and Tools.

^

Replace component previously installed with correct part number (matching numbers) from the table below to ensure system compatibility. DO NOT
mix original with updated parts) --> Required Parts and Tools.

^

Adapt the window using Guided Fault Finding.

Install the door panel, see Repair Manual Group 64 in ElsaWeb.

Tip:

During any repair which requires part replacement, care MUST be taken to ensure compatibility of replacement parts with the installed system. 

Tip:

Upgrades of window motors & regulators are only allowed under the conditions described in Technical Bulletin. 2011804. No warranty claims will be
paid for system upgrades under the provisions of this Technical Bulletin.

Campaign - Convertible Top Button/Window Clamp Bolts|Page 12239 > < Campaign - Convertible Top Button/Window Clamp Bolts|Page 12237