New Beetle L4-1.8L Turbo (AWV) (2005)
Rear Bumper Cover / Fascia: Service and Repair
Rear Part, Assembly Overview
NOTE:
-
Overview describes removal and installation of rear part for vehicles --> 06.05. Removal and installation applies to vehicles 07.05 -->, except
slight changes.
-
Rear fenders and rear bumper cover can only be removed together from vehicle as so-called rear part.
1
-
Rear part
-
Removing:
-
Remove wheelhousing liners.
-
Remove tail light cluster
-
Remove fuel flap unit.
-
Remove bolts, and.
-
Remove nuts.
-
Remove bolts and.
-
Pull left and right rear part to the outside and remove from vehicle toward rear with two mechanics.
-
Installing:
-
Before reattaching rear part, adhere anti-friction foil on contact areas again, or check condition of old anti-friction foil.
2
-
Bolt
-
6 Nm
-
Insert with locking fluid D 185 400 A2
3
-
Bolt
-
7.5 Nm
-
4x
-
Insert with locking fluid D 185 400 A2
4
-
Anti-friction foil
5
-
Welded captive nut