New Beetle L4-1.8L Turbo (AWV) (2005)
-
Trim -a- painted in color of vehicle
-
Do not paint trim -b-
4. Trim
-
Do not paint
5. Bolt/screw
-
1.5 Nm
6. Flap positioning module
7. Trim
Side Panel, Servicing
Side Panel, Servicing
Removing and installing window sill (upper section)
-
Remove flap positioning module.
-
Remove window sill (upper section) -1- securing points -arrows- with a sander/grinder and Remove of lower section -2-. Old window sill (upper
section) cannot be reused.
-
Position new window sill (upper section) -1- (after painting) on lower section -2-, then heat securing lugs -3- one after other using hot air blower
from VAS 1978 and bend lugs over. Bend lugs upward and downward alternately or left and right as applicable.
Flap Module, Assembly Overview
Flap Module, Assembly Overview