New Beetle L4-1.8L Turbo (AWV) (2005)
Lock Carrier: Service and Repair
Front Bumper - Assembly Overview
Assembly Overview
NOTE:
-
The front bumper cover is a component part of the front end and must be removed together.
-
It is essential that the tightening sequence of the bolts/screws - 10 -, - 12 -, - 15 - are observed to ensure conciseness of joints/shut lines etc.
1. Cover
-
Removing:
-
Remove wheel housing liners.
-
Removing front part.
-
Dismantle headlight washer system, if necessary.
-
Remove bolts -- and remove clips -- on left and right sides.
-
Remove bolts -- and --.
2. Wing
3. Bumper carrier
-
USA- Remove version with impact damper.
4. Insulation
-
Bonded with Butyl adhesive cord AKL 450 005 05
5. Bolt
-
Qty 4
-
30 Nm
6. Bolt
-
Qty 4
-
9 Nm
7. Wing
8. Backing
-
With welded captive nuts
-
Qty. 2