New Beetle L4-1.8L Turbo (AWV) (2005)
13 - Hex socket head bolt, 8 Nm
14 - Hex socket head bolt, 65 Nm
15 - Brake carrier with guide pins and protective cap
^
Supplied as replacement part, assembled with sufficient grease on guide pins
^
If protective caps or guide pins are damaged use repair kit. Use grease packet supplied to lubricate guide pins.
16 - Brake hose/brake line
^
With banjo bolt and seals
^
Banjo bolt to brake caliper tightening torque 35 Nm
^
Do not disconnect brake hose when changing brake pads
17 - Self-locking hex bolt, 35 Nm
^
Always replace
18 - Brake caliper
^
Do not disconnect brake hose when changing brake pads
^
Adjust parking brake cable first after maintenance or replacement
19 - Brake pads
^
Thickness 12 mm without backing plate
^
Wear limit: 7 mm including backing plate
^
Always replace both sides on an axle.
20 - Pad retaining spring
^
Always replace when changing pads