New Beetle L4-1.8L Turbo (AWV) (2005)
Headlamp Alignment Control Module: Service and Repair
Right High Intensity Gas-Discharge Lamp (With Range Control) Control Module -J568-, Removing
and Installing
Right High Intensity Gas-Discharge Lamp (With Range Control) Control Module -J568-, Removing and Installing
WARNING:
-
HIGH VOLTAGE
-
Always disconnect negative ( - ) battery terminal prior to servicing any parts of the HID lamp system marked with the yellow "HIGH
VOLTAGE"symbol.
-
After disconnecting battery, briefly turn headlights on and off in order discharge any residual voltage.
The (slave) control module is located on the right/front inner long member.
Removing
-
Remove front bumper cover.
-
Remove bolts -arrows- on module retainer.
-
Remove retainer and module together.
-
Disconnect electrical connection from module.
-
Remove screws and separate module from retainer.
Installing
Installation in reverse sequence of removal.