New Beetle L4-1.8L Turbo (AWV) (2005)
Note
Technical Background
The misfire condition may be caused by a malfunctioning ignition coil.
The following vehicles and VIN ranges are affected by this condition:
Production Solution
Vehicles are out of production.
Service
Procedure
Note
^
Check for Campaign Completion Label.
^
Verify whether a Campaign Completion Label with SAGA code 28F3 is affixed next to the vehicle emission control label under the hood. If label is
present, DO NOT proceed with this technical bulletin.
^
Address misfire DTCs stored in the ECM fault memory.
^
Replace all ignition coils that have Misfire DTCs associated to them.
^
Inspect and if necessary replace all other ignition coils (even from cylinders without misfire) as listed in the table below.