New Beetle L4-1.8L Turbo (AWV) (2005)
-
Tension steering gear on transmission support T10108 and unscrew tie rods from steering rack.
Note: To clamp steering gear, use hole "5" and the matching hole lying opposite on transmission support.
Installing
Installation is performed in reverse order of removal.
Tightening torques
Installing boots
-
Check boots for wear (slits, cracks) and check sealing surfaces of boots for dirt.
-
Install boots. Rotate tie rod beforehand so that stud of tie rod end stands in installation position.
Note: Only use original clamps.
-
Tighten clamp using Hose Clamp Pliers VAG 1275.
-
Install power steering gear.
Power steering gear, removing and installing.