New Beetle L4-1.8L Turbo (AWV) (2005)
/Page-2035002.png)
-
Remove left sound insulation - arrows -.
Vehicles with TDI engine
-
Remove charge air pipe between charge air cooler and turbocharger.
Continued for all vehicles
-
Remove right sound insulation panel.
-
Mark installation position of ball joint bolts on control arm.
-
Remove bolts - arrows -.
-
Press out drive axle. Using tool as shown in illustration.
Note: Be sure there is sufficient room when pressing drive axle out.
-
Pull out wheel bearing housing with ball joint from control arm.
