New Beetle L4-1.8L Turbo (AWV) (2005)
Note: Do not damage protective covering when doing this.
-
Unclip Shift lock solenoid -N110- out of retainer - arrows A -.
-
Pull Shift lock solenoid -N110- out of pawl - arrow B -.
-
Take Shift lock solenoid -N110- out downward.
Installing
Installation is performed in the reverse sequence of removal. In the process, note the following:
-
Hook Shift lock solenoid -N110- into pawl - arrow B -.
-
Clip Shift lock solenoid -N110- into retainer - arrows A -.
-
Bolt cover with bonded seal onto selector lever housing. Ensure seal is positioned correctly.
-
First tighten nuts - arrows A -.
-
Then tighten 2 bolts - arrows B -.
-
Assemble exhaust system and install tunnel bridge
-
Install selector mechanism and printed circuit board cover Selector mechanism and printed circuit board cover, removing and installing.
-
Install center console Body Interior
-
Install selector lever handle.
-
Connect battery Ground strap.
-
Check selector mechanism Selector mechanism, checking.
-
Enter radio code
-
Initialize power windows, set correct time on clock