New Beetle L4-1.8L Turbo (BNU) (2005)
Amplifier: Service and Repair
Convertible
Amplifier -R12- - Convertible, Removing and Installing
The amplifier is located in the left upper part of the load and luggage area.
Removing
CAUTION:
Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Disconnect negative ( - ) battery terminal.
-
When disconnecting and reconnecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on
performing OBD program and electrical system function checks as specified.
-
Remove screws -3-.
-
Remove nuts -1-.
-
Disconnect both electrical connections.
-
To remove amplifier bracket (if necessary), remove nuts -2-.
Installing
Install in reverse order of removal, noting the following.
-
Install and tighten nuts -1- to 10 Nm (89 in.lb).