volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Carrier For Rear Lid Remote Release Motor, Removing and Installing|Page 10550 > < Carrier For Rear Lid Remote Release Motor, Removing and Installing|Page 10548
Page 2
background image

-

Remove bolts - 1 - and pull water drain hose - 3 - off carrier - 2 -.

-

Pull motor carrier - 2 - off rear lid and thus off VW emblem.

-

If necessary, remove emblem from upper side of rear lid.

Installing

Installation is performed in the reverse order of removal.

-

Replace securing clips for electrical wiring.

Carrier For Rear Lid Remote Release Motor, Removing and Installing (USA)

Carrier For Rear Lid Remote Release Motor, Removing And Installing (From 09/2001) (USA)

Removing

-

Remove rear lid trim

-

Disconnect harness connector - arrows -.

-

Disengage operating rod - 1 - for lock carrier.

-

Remove cable from clips - 2 -.

Carrier For Rear Lid Remote Release Motor, Removing and Installing|Page 10550 > < Carrier For Rear Lid Remote Release Motor, Removing and Installing|Page 10548