New Beetle L4-1.8L Turbo (BNU) (2005)
Continued for all vehicles
-
Disconnect brake lines on brake master cylinder and seal brake lines with plugs from Repair kit 1 HO 698 311 A.
-
Remove nuts from brake master cylinder.
-
Carefully remove brake master cylinder from brake booster.
Installing
-
Installation is carried out in reverse sequence of removal.
Observe following points when installing:
-
When installing the brake master cylinder and brake booster unit, ensure that the push rod is correctly located in the brake master cylinder.
-
After installing, bleed the brake system.
-
Bleed clutch.
-
Start basic settings.
Torque settings