New Beetle L4-1.8L Turbo (BNU) (2005)
Water Pump: Service and Repair
Coolant pump, removing and installing
Special tools, testers and auxiliary items required
^
Refractometer T10007
^
Drip tray V.A.G 1306
^
Torque wrench V.A.G 1331
^
Spring-type clip pliers VAS 5024
Note:
^
Always replace seals and gaskets.
^
The lower part of the toothed belt guard can remain installed.
^
The toothed belt remains in position on the crankshaft toothed belt pulley.
^
Cover the toothed belt with a cloth to protect it from coolant before removing the coolant pump.
Removing
-
Drain coolant.
-
Remove ribbed belt.
-
Remove upper and center parts of toothed belt guard.
-
Take toothed belt off coolant pump toothed belt pulley.