New Beetle L4-1.8L Turbo (BNU) (2005)
/Page-777002.png)
Checking installation position of double clamp
-
Position double clamp approx. 5 mm away from marking "A" -arrow 1 -.
NOTE:
-
Marking "A"- arrow 1- for vehicles with manual and automatic transmission.
-
Marking "S"- arrow 2- is not valid for this engine.
Installation position of mounting
-
Angled side on base of mounting -arrow- points forward.
Separating point on exhaust pipe
Special tools, testers and auxiliary items required
-
Body saw, e.g. V.A.G 1523
Work sequence
-
Separate exhaust pipe at right angles at separating point -arrow 2 -.
-
When installing position repair double clamp -4- on side markings -arrows -1- and -3-
-
Tightening torque: 40 Nm
