volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Warnings and Safety Measures For Lead-Acid Batteries|Page 7437 > < Warnings and Safety Measures For Lead-Acid Batteries|Page 7435
Page 4
background image

-

VAG 1331 Torque wrench (or equivalent 5 - 50 Nm).

Battery, disconnecting

CAUTION:

Before beginning repairs on the electrical system

-

Obtain anti-theft radio security code.

-

Switch off all electrical consumers.

-

Switch ignition off and remove ignition key.

-

Do not loosen or remove ground strap from body. Disconnect terminal from battery only.

-

Remove engine cover pulling it upwards.

-

Release positive ( + ) battery terminal cable from clips -1-.

-

Remove battery cover by pressing the locks -2-.

NOTE:  Illustration shows vehicle with Tiptronic automatic transmission. Other vehicles may have a different battery's positive ( + ) cable
configuration that is engine-transmission dependent. As such, clip removal operations may vary slightly.

-

Unclip fuse holder from battery container pressing the lock with a screwdriver -1- and pushing the fuse holder towards the rear part of the vehicle
-arrow-.

-

First disconnect negative ( - ) battery terminal from battery (tightened to 6 Nm).

-

Then disconnect positive ( + ) battery terminal clamp (tightened to 6 Nm). and remove cable.

Battery, reconnecting.

Warnings and Safety Measures For Lead-Acid Batteries|Page 7437 > < Warnings and Safety Measures For Lead-Acid Batteries|Page 7435