New Beetle L4-1.8L Turbo (BNU) (2005)
-
Remove bolts - 1 - while vehicle stands on wheels. If necessary, lift vehicle until bolts are accessible.
-
Loosen wheel bolts.
-
Raise vehicle to installation height, taking tension off coil springs.
-
Remove wheels.
Secure vehicle to lifting platform.
-
Vehicle must be secured to lift arms of lifting platform before rear axle is removed.
CAUTION: If a vehicle is not secured, there is danger that the vehicle could slip off the hoist!
-
Remove plug from longitudinal member - 3 - and pull in Tensioning Strap T10038.
1 - Lift arm of lifting platform
2 - Tensioning strap T10038
Vehicle must be secured by tension belts on right and left sides.
-
Vehicles with automatic headlight range control
-
Remove coupling rod of Left Rear Level Control System Sensor G76 from rear axle
-
Sensor G76 on rear axle.
Continued for all vehicles