New Beetle L4-1.8L Turbo (BNU) (2005)
-
Clamp off ATF cooler hoses with hose clamps 3094 and disconnect from ATF cooler.
-
Remove ATF cooler - 1 - from transmission - arrow A -.
Installing
-
Installation is performed in the reverse sequence of removal. In the process, note the following:
-
Replace sealing rings for ATF cooler.
-
When installing ATF cooler - 1 - seat lug - arrowB - into cutout in transmission housing.
-
Insert bolt - arrow A - and tighten to 36 Nm.
-
Check level of coolant in cooling system.
-
Check ATF level and top up if necessary.