New Beetle L4-1.8L Turbo (BNU) (2005)
Valve Body: Service and Repair
Assembly Overview
Assembly overview, 09G, 6 Spd. A/T
1. ATF control plug, 27 Nm
^
Checking ATF level and topping up
2. Oil seal
^
Always replace
3. Overflow pipe, 2 Nm
^
Remove to drain ATF
^
Checking ATF level and topping up
4. Oil pan
5. Bolt, 7 Nm
^
Tighten oil pan bolts in several stages and using alternating and diagonal sequence
6. Seal
^
Always replace
7. Magnet
^
Qty. 2, in webs of oil pan
^
Clean before installing
8. Bolt 8 Nm plus 1/4 turn (90°)
^
Qty. 12 of various lengths, used to secure valve body to transmission
^
Always replace bolts