New Beetle L4-1.8L Turbo (BNU) (2005)
-
Carefully pull Transmission fluid temperature sensor -G93- - 7 - and retainer out of valve body.
Note: For the reinstallation, note the mounting of the retainer on the Transmission fluid temperature sensor -G93-.
-
Unclip wiring harness on retainer - 8 -.
-
Remove selector lever - 1 - on selector shaft.
Note:
-
Carefully hold the selector lever - 1 - with a pair of pliers - 2 -, so that the turning moments are not transmitted to the Multi-function Transmission
Range (TR) switch -F125-.
-
Ensure the slide valve - 3 - on the valve body (in which the selector lever engages) is not damaged.