New Beetle L4-1.8L Turbo (BNU) (2005)
5. Bushing
^
Clipped into rubber noise damper
6. Rubber noise damper
^
Installation position: Arrows point toward front of vehicle
Fig. 1 Separating cover from gear lever knob and assembling to gear lever knob
-
Turn cover inside out.
-
With a screwdriver carefully pry off clamping sleeve (arrow) and pull gear lever knob out.
-
Installation is carried out in the reverse sequence, when doing this note the following:
-
Insert gear lever knob in cover.
-
Push clamping sleeve onto gear lever knob and engage.
-
Install gear lever knob and cover together.
Gear Lever and Gear Lever Housing, Servicing
Gear lever and gear lever housing, servicing, 02J, 5 Spd. M/T