New Beetle L4-1.9L DSL Turbo (ALH) (2003)
NOTE: The rivet -arrow A- may not have an eyelet with cable as shown in the illustration
-
Remove guide rail -2- from slider -4-
-
Remove rivet -1- securing eyelet on the short lower cable
-
Remove rivet -2- securing eyelet on the long upper cable
NOTE:
-
On some vehicles, the rivet -2- is securing a small bracket
-
Remove rivet and small bracket
-
Using cutters -S-, cut off eyelet from the short lower cable
-
Remove short lower cable from cable guides -A- & -B- in direction of arrow
-
Check cable guides -A- & -B- for wear or damage and remove as necessary