New Beetle L4-1.9L DSL Turbo (ALH) (2003)
^
Clean glass where it inserts into window regulator clamps using 3M(R) General Purpose Adhesive Cleaner Part No: 08641.
^
Locate the rubber isolators (included in kit) and scuff the area they contact the glass with 120 grit sand paper to remove gloss.
^
Clean scuffed area with 3M(R) General Purpose Adhesive C
leaner Part No: 08641.
^
Apply a 10 mm diameter spot of 3M(R) Channel Bonding and Sidelite Adhesive, Part No: 08641, to one side of the rubber on each isolator.
Tip:
Adhesive application tool is available locally.
New Beetle Shown:
^
Install rubber isolators into regulator clamps.
New Beetle Shown: