New Beetle L4-1.9L DSL Turbo (BEW) (2006)
Oil Filter Housing: Service and Repair
Oil Filter Bracket Assembly Overview
1
Oil pressure switch (F1), 20 Nm
‹› 0.7 bar switch: brown
‹› If sealing ring is leaking cut open and replace.
‹› Checking => [ Oil Pressure and Oil Pressure Switch, Checking ] See: Engine Oil Pressure/Testing and Inspection.
2
Gasket
‹› Replace
3
15 Nm + 90° (1/4 turn) additional turn
‹› Replace
‹› First, fasten upper left and lower right bolts, and then tighten all four bolts in a diagonal sequence
4
Oil filter bracket
5
Seal
‹› Replace
6
Oil supply line