New Beetle L4-1.9L DSL Turbo (BEW) (2006)
Vanity Lamp: Service and Repair
Interior Lamps and Switches
‹› When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic
sedge, screwdriver) will be positioned using commercially available adhesive tape.
Illuminated Vanity Mirror
‹› Removing and installing the Driver Side Illuminated Vanity Mirror (W20) and the Front Passenger Illuminated Vanity Mirror (W14) are the same.
CAUTION!
‹› Turn off the ignition and all electrical components.
‹› Remove the key.
‹› When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying
tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.
Removing
-
Insert the (VAS 3409) or a small screwdriver behind the lens and pry the lamp out.
-
Remove the lamp.
-
Disconnect electrical connector.
Bulb 12 V/5 W
Installing
Install in reverse order of removal, noting the following:
-
Make sure the illuminated vanity mirror is working correctly.